照明工程学报

2007, (01) 64-66

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Past Issue) | 高级检索(Advanced Search)

LED环形光源研制
Study on Lighting Source Based on Light Emitting Diodes with Ring Shape

李炳乾;
Li Bingqian(Department of Physics, Foshan University, Foshan 528000)

摘要(Abstract):

根据大型精密电子设备对高可靠性光源的要求,研制了LED环形光源,光源选用主波长在625nm的红色LED作为发光元件,在设计方面,对LED采用降额使用,并且对LED和光源都进行了加速老化,保证了光源的可靠性。环形光源额定功率仅为2.0W左右,约为传统CCFL光源的20%,在电源电压发生波动±5%波动时,发光强度的变化小于±5%。
The lighting source with ring shape is designed and demonstrated. The lighting source is consisted of lighting emitting diode (LED), and some technique, such as accelerate aging, light load etc., are used to improve the reliability and stability of the ring shape lighting source, so the high reliability and stability is obtained. The power consume of the lighting source is less than 2.0W, only 20 percent of the traditional lighting source which consisted of cool cathode fluoresces lighting (CCFL). The lighting source is driven by the high precisely regulated power supply, when the voltage of the supply changed 0.5V, the power consume, input current and illumination changes within 10%.

关键词(KeyWords): 发光二极管;光源;环形;可靠性
lighting emitting diode; lighting source; ring shape; reliability

Abstract:

Keywords:

基金项目(Foundation): 广东省自然科学基金项目(04011462);; 佛山市科技发展专项资金(04030021);; 佛山科技学院博士启动基金项目

作者(Authors): 李炳乾;
Li Bingqian(Department of Physics, Foshan University, Foshan 528000)

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享