陈超;杜国红;曹艳亭;黄杰;梁培;
CHEN Chao;DU Guohong;CAO Yanting;HUANG Jie;LIANG Pei;College of Optical and Electronic Technology,China Jiliang University;Hengdian Group Tospo Lighting Co.Ltd.;

• 1:中国计量大学光学与电子科技学院
• 2:横店集团得邦照明股份有限公司

摘要(Abstract)：

现有灯具对于廉价的LED环形光斑有着较大需求,近距离产生较大半径的均匀环形光斑能够有效应用于灯具出光效果设计。根据能量守恒定律构建映射关系,数值计算建立组合透镜模型。根据参数化研究结果,采取环形倾斜阵列底部开口半径为3 mm、底部高度为2.4 mm的组合透镜的方法。针对扩展光源以及倾斜角度对于光斑均匀度的影响,进行了仿真模拟,结果表明可实现均匀环形光斑,适用于灯具背光源环形出光效果设计。
Existing lamps have a huge demand for low-cost LED ring spot. The uniform annular beam with a larger radius with short distance can be applied to the design of the light emitting effect. Constructing the mapping relation according to the law of conservation of energy,a combined lens model is made for a numerical calculation. Depending on the results of the parametric study,a combined lens is taken using an annular inclined array with bottom height of 2. 4 mm and a bottom opening radius of 3 mm. According to the extended light source and tilt angle's effect to the spot uniformity,the simulation results show that the uniform circular spot can be realized. The design of the ring spot is effective on the back light source.

关键词(KeyWords)： LED光环;组合透镜;自由曲面设计;参数优化
LED ring spot;combined lens;free surface design;parameter optimization

Abstract:

Keywords:

基金项目(Foundation): 广东省佛山市顺德区产学研合作项目(批准号:2014CXY08);; 浙江省仪器科学与技术重中之重建设学科光电检测方向人才培育计划项目(批准号:JL150541)

作者(Authors): 陈超;杜国红;曹艳亭;黄杰;梁培;
CHEN Chao;DU Guohong;CAO Yanting;HUANG Jie;LIANG Pei;College of Optical and Electronic Technology,China Jiliang University;Hengdian Group Tospo Lighting Co.Ltd.;

参考文献(References)：

• [1]李澄,李农.一种用于均匀照明的LED透镜设计方法[J].照明工程学报,2010,21(3):46-49.
• [2]李梦远,韩姗,李柏承,等.LED路灯矩形均匀照明方法综述[J].激光杂志,2014,35(10):14-18.
• [3]李竞.实现LED矩形均匀照明的透镜设计.应用光学,2011,32(2):211-214.
• [4]张康,苏成悦,王维江.均匀照明方形光斑的LED自由曲面透镜设计[J].照明工程学报,2014,25(1):82-88.
• [5]史永胜,买迪,宁磊.实现在不同场合中LED均匀照明的方法研究[J].应用光学,2011,32(4):613-617.
• [6]黄锦胜,邓华秋.通过LED路灯自由曲面设计实现均匀照度的环形光斑[J].照明工程学报,2013,24(4):76-79.
• [7]贺志华,董前民,王少雷,等.用于道路环形岛处的LED均匀配光透镜设计[J].中国计量学院学报,2014,25(3):314-318.
• [8]CHENG H,XU C,JING X,et al.Design of compact LEDfree-form optical system for aeronautical illumination.Applied Optics,2015,54(25):7632-7639.
• [9]PAL S.Optimization of LED array for uniform illumination over a target plane by evolutionary programming.Applied Optics,2015,54(27):8221-8227.
• [10]WU H,ZHANG X,GE P.Double freeform surfaces lens design for LED uniform illumination with high distanceheight ratio.Optics And Laser Technology,2015,73:166-172.
• [11]SUN WS,TIEN CL,LO WC,et al.Optical design of an LED motorcycle headlamp with compound reflectors and a toric lens.Applied Optics,2015,54(28):E102-E108.
• [12]CHEN HT,CHEUNG YF,CHOI HW,et al.Reduction of Thermal Resistance and Optical Power Loss Using ThinFilm Light-Emitting Diode(LED)Structure.IEEETransactions on Industrial Electronics,2015,62(11):6925-6933.